Introduction
Don't worry about repairing a simple button on your shirt, trousers or any other sport items. They can often break off - but they're very easy to fix it again and again. This guide will show you how to do it with a simple needle and thread.
Tools
-
-
Identify where the button fell out. Clean up the area including removing any old thread which is still there.
-
Prepare the needle and thread, and the replacement button.
-
Tip: many garments come with a spare button on the inside, sewn to the care label. Check there, before buying a new button.
-
-
-
Start by threading the needle onto approximately 30cm of pre-cut thread. Next, tie both ends together to create a loop of thread with the needle on it.
-
Add a second or third knot over the first, to make it thicker. It should be large enough to not pull through the fabric.
-
Push the needle through the fabric, from the backside of the fabric and pull tight. Thread the needle through one hole of the button, from the backside.
-
Next, thread the needle back through the other (opposite) hole in the button, and then push through the fabric in the same location as the thread coming from the backside.
-
Repeat the complete Step 2 again, to add extra strength.
-
Note: We have demonstrated on a 2-hole button. For a 4-hole button, simply repeat Step 2 for the other button holes.
-
-
-
Once the button is secure, it is time to finish the repair on the inside, with a knot.
-
Carefully pass the needle through the loops of thread on the backside of the repair, taking care not to pass it through the fabric itself.
-
Careful: Do not pull tight! Leave a loop large enough to pass the needle through.
-
Pass the needle through the loop, and now pull tight to create the knot. Repeat this process once more to add a second knot, for extra security.
-
In need of another repair? Don't worry! Check out our other guides to find quick solutions for your favourite clothing, footwear and equipment!
