HyperX CloudX Flight Charging Port Replacement

Written By: Santiago Rojas
  • Comments: 0
HyperX CloudX Flight Charging Port Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

Over time, foreign material will enter the charging port of your HyperX CloudX Flight and degrade naturally. This can sometimes lead to issues with charging your device. Replacing the port is easy and requires minimal soldering knowledge.

  1. GGGKQwtZxSY5gAxy

    • Place the device on a flat surface and orient the ear cups towards yourself.

  2. AGXHYlOiMGKbfTCW
    AGXHYlOiMGKbfTCW
    OMogf1CTQtAmaj5K

    • Gently pull around the perimeter of the left ear cup until the cushion is fully removed.

  3. yipDT61qNMJODihQ

    • Use a small Phillips screwdriver to remove the base plate.

  4. RkJJOddkBGMFFsVC

    • After removing the plate, locate the charging port on the board. You can carefully desolder the charging port from the board by pointing the tip of your soldering iron to melt the existing connections.

Conclusion

To reassemble your device, follow these instructions in reverse order. Ensure to carefully resolder the USB port as to not interfere with other connections.

Author

Santiago Rojas

Member since: 04/09/24

291 Reputation

0 comments