Imation Superdisk USB Drive Metal Casing Replacement

Written By: Ryan
  • Comments: 0
Imation Superdisk USB Drive Metal Casing Replacement

Difficulty

Very easy

Steps

8

Time Required

10 - 15 minutes

Introduction

  1. sAP5uImYZZCnyMRH
    sAP5uImYZZCnyMRH
    432WNxDp1BVbTJDc

    • Flip the device over so the bottom is facing up.

    • You will know it is the bottom because there will be six silver screws visible.

  2. 12oJTUJkElFVHSuw
    12oJTUJkElFVHSuw
    uxnDBT2Wxa5OrLji

    • Remove the USB converter device by gently pulling it out.

    • Do not pull the converter device out by the cord.

  3. MuvOLRjTCilWLF2Y
    MuvOLRjTCilWLF2Y
    oucIgKVhJeXykvEQ

    • Remove the six silver screws using a small Phillips head screwdriver.

  4. 4DuPxnTeMEVr45jg
    4DuPxnTeMEVr45jg
    pkpTYVd6de1r6XWM

    • Slide the bottom plastic panel of the shell down so it is free of the end cap and the top panel.

    • Lift panel free of device.

  5. 1hfJQHwde6Zb5Ioq
    1hfJQHwde6Zb5Ioq
    WXPwZBNwe3wVoJ4W

    • Identify the end cap by noting the label "SuperDisk Drive" above where you would insert a floppy disk.

    • Remove the plastic end cap by sliding it forward, freeing from the rest of the device.

  6. peAqnUoDjD3mQLRR
    peAqnUoDjD3mQLRR
    2KLddHtCZPfPhxtg

    • Slide the metal housing out of the plastic shell.

  7. Y3mhswu5qLLMlTyi
    Y3mhswu5qLLMlTyi
    FTHXxOpS65RbBYoM

    • Slide metal panel out of the metal casing.

  8. DhfMjVD1odCOkwjC
    DhfMjVD1odCOkwjC
    ZIRZ634rVJAgYTNf

    • Slide disk drive out of metal casing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ryan

Member since: 13/02/14

1 Reputation

0 comments