Inse N500 Brush Roller Replacement

Written By: Siaosi Kaufusi
  • Comments: 2
Inse N500 Brush Roller Replacement

Difficulty

Very easy

Steps

2

Time Required

1 minute

Introduction

If your Inse vacuum (model N500) is producing poor or limited suction quality as a result of a worn down or damaged brush roller, use this guide to replace the brush roller. The brush roller’s main function is to sweep debris into the vacuum’s line of suction. Without this, the vacuum performance is restricted to a smaller surface area.

  1. YDNvRTtAaUVA4jgv
    YDNvRTtAaUVA4jgv
    1D1kRMykBPvgDGTS
    xpDuNWoYGtqqcyWa

    • Press down on the release tab on the bottom of the vacuum to release the brush roller.

    Great guide if you can find a roller brush for an INSE N500/N5T.

    Patti -

  2. hkvggkyUnUR1EOUJ
    hkvggkyUnUR1EOUJ
    VAWhvwmZYrWp5YCC

    • Remove the brush roller.

    This picture of the roller brush is the exact one I need. Where can I get one for my INSE N500/N5T?

    Thanks let me know.

    Patti -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Siaosi Kaufusi

Member since: 12/09/23

709 Reputation

0 comments