Introduction
In this guide you will replace the mother board of your JBL headphones. Some issues with these headphones faced by users may be caused by a short circuit, or some other issue with the motherboard, and require a replacement. This replacement is moderately difficult, and can be time consuming. It will require a jimmy tool, screwdriver, and soldering iron.
-
-
Insert a jimmy into the seam between the cap and chassis.
-
Pry around the perimeter of the cap until it fully releases.
-
Remove the cap.
-
Conclusion
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.
