JVC Adixxion GC-XA1BU Battery Cover Replacement

Written By: Christina Michelle Johnson
  • Comments: 0
JVC Adixxion GC-XA1BU Battery Cover Replacement

Difficulty

Easy

Steps

6

Time Required

15 - 30 minutes

Introduction

To complete this guide, you will need to purchase a new battery compartment cover and make sure that you have the tools listed. While it is not necessary to remove the battery to be able to remove the battery cover, it is always good practice to make sure that the device is completely powered off before attempting any repairs.

  1. 4shyQt5amun1eDKJ

    • Find the side of the camera with the black switch shown.

  2. B2Ja4KpkSs213ws4

    • Push down on the black switch.

  3. UuBMOoDQ5IxWHGIb

    • Slide the battery cover back while pushing down on the black switch.

  4. G2BFqCBcMlljvPYA
    G2BFqCBcMlljvPYA
    MQiOEgZhZbvEMgkx

    • Open the battery compartment and push the blue battery release switch.

  5. XlJHBBAkLQ4jSR4x

    • Remove the battery from the camera.

  6. oDbfFbEEE252AewQ

    • Remove the two Phillips screws (4mm x 3mm) using the Phillips #00 screwdriver.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Christina Michelle Johnson

Member since: 16/01/15

1047 Reputation

0 comments