Introduction
Had the main brush not spinning anymore, because the connexion to the brush motor was faulty. Here is a walkthrough how to remove the top carter to gain access to the brush motor and the (bad) connections.
-
-
The side carters are just clipsed, use a flat screwdriver. Help yourself with the pictures to locate the clips
-
The screws location is indicated by the red circles.
-
-
-
Some of them are deep so use a long philips screwdriver.
-
The yellow circles show the wheels that need removal because there are screws located below.
-
Do not unscrew behind the sticker, this is useless
-
Conclusion
Pour réassembler votre appareil, suivez les instructions dans l'ordre inverse.
One comment
How do i finalize and publish ?