KYVOL CYBOVAC E20 Battery Replacement

Written By: Abraham Burciaga
  • Comments: 2
KYVOL CYBOVAC E20 Battery Replacement

Difficulty

Easy

Steps

4

Time Required

5 - 8 minutes

Introduction

The Kyvol Cybovac E20 contains a 3200mAh lithium-ion rechargeable battery. This guide should be used to replace your battery if your device:

  • Fails charging
  • Will not hold charge
  • Will not turn on

  1. CLjM46XX5J41rSBo
    CLjM46XX5J41rSBo
    OMtj6gTRS61bgde1

    • Start by laying the device on a flat surface with the logo facing up.

    • Flip the device over.

  2. qfMquyeMZbIPtexl
    qfMquyeMZbIPtexl
    RlKo2cgsuvmWpWsd

    • Remove two 1 mm screws using a Phillips #00 screwdriver.

  3. CObBS5vwhIXDgbgS
    CObBS5vwhIXDgbgS
    fsBM1ACJmWm4VVFa

    • Remove the cover.

  4. VTwsJtnE1RtMeKLa
    VTwsJtnE1RtMeKLa
    UVCM1Enly3mjfNVG

    • Lift the battery.

    • Press down on the top of the white connector.

    • Remove the battery from the vacuum.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Abraham Burciaga

Member since: 09/02/23

127 Reputation

2 comments

Where can I find a compatible battery? Can I please have some links?

Mario Rossi -

I am also looking for some links for a replacement battery

David -