KitchenAid KSM150PSER Carbon Brushes Replacement

Written By: Hayley Young
  • Comments: 3
KitchenAid KSM150PSER Carbon Brushes Replacement

Difficulty

Easy

Steps

2

Time Required

1 minute

Introduction

If your device is not turning on it could be because of worn down carbon brushes. Here is a guide to replace these brushes.

  1. TebWJkbR4Ohly1RK
    TebWJkbR4Ohly1RK
    UYkahLU5dxkWhBdX

    • Using a flat head screwdriver, unscrew the brush cap on each side of the mixer by turning them counter clockwise.

    • Remove brush cap by pulling it toward you.

    • The brushes are held in by springs and will fly out if removed too fast.

    Unbedingt Stecker aus der Steckdose ziehen! Sollte eigentlich selbstverständlich sein, sag es aber lieber noch einmal.

    Alex Atr -

  2. Ks2rjEIexeQqSHQW

    • Remove brush by pulling it toward you.

    • One corner of the brush is flattened. You can check which way the brush is oriented by shining a flashlight inside the hole.

    Hallo,leider habe ich es falsch reingesetzt und jetzt steckt es fest.

    Können Sie mir sagen wie İch es raus bekommen könnte? Danke

    Lale Aras -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Hayley Young

Member since: 03/12/16

253 Reputation

One comment

I’ve been procrastinating on trying to fix my KA mixer on my own…today I did it. The directions were pretty clear and the only thing wrong was that when I had previously cleaned my mixer, I put the carbon brushes in the wrong way. Once I shined a flashlight into the hole I could see where the notched corner went.

Amber Reimer -