Introduction

This guide will take you through the process of replacing the screen in an LG Optimus F60. This task should take about 6 minutes to complete.

  1. geKywjwQ4LJMMJgk
    geKywjwQ4LJMMJgk
    1RByXYrwZvHjUHTK
    GM3uhgGQZkyWlhvy
    • Hold the phone in your hand and position the small plastic opening tool or your finger under the lip of the phone by the USB port.

    • Pry or lift up on the indent with the opening tool.

    • Remove the back panel.

  2. avNtkVTgUdKoVbQU
    avNtkVTgUdKoVbQU
    YnQ2tKAakMtIvWcy
    ARBY5HlHNCuAFaau
    • Place the small plastic opening tool or your finger at the indentation at the base of the battery.

    • Pry upwards or lift with your finger and remove battery.

  3. ULJJE2qrGhTiPIQn
    • Remove the eight 4 mm screws on the inner panel using the phillips #000 Screwdriver

  4. 4MMlCoBCbhWNVFHf
    • Remove bottom of inner panel.

  5. yKAQXqbtA26ikaCJ
    yKAQXqbtA26ikaCJ
    G3VpZx5FSWwsHB3E
    n6DQyNKyXrwiiwbB
    • Remove inner panel using plastic opening tool.

    • Apply force upwards while wiggling the tool further in.

  6. JlJGRUdKFTGonBPM
    JlJGRUdKFTGonBPM
    n14hMFPM6eYWeMkn
    Mw5Dtef3kyXON3IR
    • Unlatch Connector on bottom left of phone.

  7. 3amLMEWyasCRUrTf
    3amLMEWyasCRUrTf
    XsHLcvTf1XDVejXa
    • Pull motherboard to detach digitizer from the motherboard

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kayli Beidler

Member since: 09/04/18

183 Reputation

One comment

The LG f60 digitizer replacement was difficult to find on internet as of Nov 2023. Luckily I found the right vendor.

The ifixit instructions and photos on this page were superb. I repaired the phone easily.

The only obstacle not in the instructions was the removal of the glass shards that were around the edge of the old frame that had to be picked off so that the digitizer could fit flat in the original frame.

Thanks for your site.

Victor Lewandowski -