Introduction

The keyboard is placed on the motherboard but is not attached in any way. This step is easy because there are no necessary tools involved. It is a simple and easy step that allows you to clean the keyboard.

  1. FPSYFGVpnBWWKCml
    • Turn the phone so the back side is face up.

  2. 3jtirGF1luptY6rU
    3jtirGF1luptY6rU
    IafUZvK1aRu1NJIH
    • Use your thumb to press on the small ridge at the bottom of the phone, then push upward to slide off the back casing.

  3. ATqMoXmjyVouI11O
    ATqMoXmjyVouI11O
    1YERmLPBvXYeo5gg
    • Use your index finger to pull the top of the battery out from the top center divot. Then pull the battery towards yourself to remove it from the compartment.

  4. f1X1H1MfB31LuI5M
    f1X1H1MfB31LuI5M
    UJhW2VLG52Oi3XQp
    • Use a Phillips #00 screwdriver to remove the six 2.4mm screws, which secure the back panel.

  5. PQ3bXk3XkJpN26Fu
    • Push a spudger or small tool under the inner edge of the back panel and gently pry upward to separate it from the main body.

  6. oRtrSrQMF6W526JH
    oRtrSrQMF6W526JH
    inP4RPkbdRAnPHSR
    • Pop off the camera, lock, and volume buttons from the side of the phone using tweezers.

  7. NoWXBTZGEvHTRHnj
    NoWXBTZGEvHTRHnj
    bO3GTSj3m2jKaMeD
    • Use the Phillips #00 screwdriver to remove the two 3mm screws, which secure the motherboard.

  8. 4goxcRCtaCVER1Zw
    4goxcRCtaCVER1Zw
    uXOTr4ZCl2SPRblM
    • Carefully lift and remove the motherboard from the main body.

    • The connector cable will still be attached to the motherboard. Any damage to the connector cable may permanently disable the phone.

  9. QEldIy3u15NVT5fV
    QEldIy3u15NVT5fV
    kKTJOxWttQIBmBFr
    • Carefully unclip the metal tab to separate the connector cable from the motherboard.

  10. CY2wwoqPlEa1yoyB
    CY2wwoqPlEa1yoyB
    H26yDentZNtFP5pe
    • Once the connector cable is detached from the motherboard, you have successfully removed the motherboard from the phone.

  11. fU4XZ1cDgCN1BAMA
    • Turn the motherboard over and carefully remove the keypad from the motherboard.

    • The keyboard may be sitting loosely in the case (not attached to the motherboard). Carefully remove keyboard from case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Micaela Saqui

Member since: 19/04/12

78 Reputation

0 comments