Lefant M210 Wheel Assembly Replacement

Written By: Adrian pg
  • Comments: 0
Lefant M210 Wheel Assembly Replacement

Difficulty

Moderate

Steps

5

Time Required

20 - 40 minutes

Introduction

This guide provides step-by-step instructions for replacing the wheel assembly on the Lefant M210 robot vacuum.

  1. hxtPpCmZYRXByvvA
    hxtPpCmZYRXByvvA
    AoUSpFCeddAA2bIe

    • Flip the Lefant M210 over to have a clear view of the brushes.

  2. FIvpKF4GHYux2Urv
    FIvpKF4GHYux2Urv
    EpBeJrcoPnFBFdaW
    aWQxLHpaquDDGkkT

    • Place the blue tool under the circular part of the brush in the center

    • Push down the other end of the tool to pop out the brush component

    • When replacing, align the bottom of the brush with the connector on the vacuum and push down to set it in place.

  3. Zqk6gIHxJmdwCqpW

    • Use a Phillips screwdriver to remove four screws near each wheel.

  4. 15pWyj44ycVQtDyB
    15pWyj44ycVQtDyB
    sYBEsOhQWCBRXKZ5

    • Remove the plastic cover next to each wheel.

    • Grip both sides of the wheel and pull upwards.

    • The wheels of the device require some force to remove.

    • Don't pull the wheels too hard as they are attached to cables and may be damaged if yanked.

  5. BMWeYMhJZwUWDeMA
    BMWeYMhJZwUWDeMA
    mE5NGmcVusnICMlZ
    FjYfHF1xX3mP2xC6

    • Hold the wheel up and detach the connector to release it from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Adrian pg

Member since: 09/09/24

147 Reputation

0 comments