Lenovo IdeaPad 1 14IGL7 Touchpad Replacement

Written By: Nathan Costa
  • Comments: 0
Lenovo IdeaPad 1 14IGL7 Touchpad Replacement

Difficulty

Moderate

Steps

9

Time Required

5 - 15 minutes

Introduction

This is a guide on how to replace the touchpad on the Lenovo IdeaPad 1 14IGL7. You may need to consult this guide when your touchpad is no longer responsive, and you need to replace it. Please take precaution to not cause harm to the device.

  1. whaWhLUBVKRwboaL

    • Power off your laptop before beginning disassembly.

    • Place the computer upside down on a flat surface.

  2. KFV3WJeADFXjfKtI
    KFV3WJeADFXjfKtI
    EufREiwOYaX5HHAK

    • Remove the nine 7 mm screws from the back panel using a Phillips #00 screwdriver.

  3. 3S4c3rCVrL4Ra6hN

    • Insert an opening pick between the back panel and the body of the laptop.

    • Pry up the latches around the back panel and remove the panel from the laptop.

  4. ibRwgvvkvyjOrWtl
    ibRwgvvkvyjOrWtl
    SBFqPGAKPwmBcZTW

    • Remove the six 5.5 mm screws that secure the battery using a Phillips #00 screwdriver.

  5. DWEqOoCEuQZnfLnW
    DWEqOoCEuQZnfLnW
    Klv1AfcTWSogSqJU

    • Gently pull on the cable attached to the motherboard in the same direction as the individual wires are running.

    • Be sure to ground yourself by wearing the anti-shock wristband to prevent damage to the components.

    • Pull evenly on the full width of the cable so that no individual wires are overly strained.

  6. ZVNkUFTC1Jk32EH5

    • Remove the battery.

  7. BtMZkLmjfKWWi6sC

    • Remove the three 3 mm screws that hold the metal bracket in place using a Phillips #00 screwdriver.

  8. cJrY4shUTem1EMWq

    • Carefully lift the metal bracket from the device and set it aside.

  9. hFZDJrkoRUW3dM2m

    • Lift the touchpad's cover and remove the touchpad from the laptop.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Nathan Costa

Member since: 18/03/24

360 Reputation

0 comments