Lenovo IdeaPad 330S-15ARR Fan Replacement

Written By: Jacob McPhee
  • Comments: 0
Lenovo IdeaPad 330S-15ARR Fan Replacement

Difficulty

Moderate

Steps

6

Time Required

30 minutes

Introduction

If your Lenovo IdeaPad 330S-15ARR laptop is overheating, making loud disrupting noises, or just not working, follow this guide for step-by-step instructions on how to replace the fan.

  1. wYwSRYt1TQjtM66M
    wYwSRYt1TQjtM66M
    LE5INsjkee2xIh1H
    UqjcL1I1rH3GvvN6

    • Remove the ten 3.3 mm screws securing the back panel using a Phillips #00 screwdriver.

    • Use a Jimmy or your fingernail to pry the back panel off.

  2. YFuycbwMSxXTpCEU
    YFuycbwMSxXTpCEU
    b1WrniFqjM2Tmcq2
    PHjQrvZT1HmWKrvK

    • Remove the six 3 mm screws from the black board using a Phillips #00 screwdriver.

    • Remove the black board.

  3. 3FTZyWcIXZEswHbP
    3FTZyWcIXZEswHbP
    GUOogQkSBkrl2oKv

    • Remove the black electrical tape from the fan.

  4. SfFHvJ4UxD2CrooS

    • Disconnect the fan from the circuit board by pulling on the plastic part of the wire towards the fan.

  5. VWVSExFwO5Zg22SH

    • Remove the five 3 mm screws holding the fan in place using a Phillips #00 screwdriver.

  6. SoxWPkBDi1CTQDEF

    • Lift the fan to remove it from the laptop.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jacob McPhee

Member since: 16/10/24

291 Reputation

0 comments