Lenovo Legion Y520-15IKBN Base Panel Replacement

Written By: Connor
  • Comments: 1
Lenovo Legion Y520-15IKBN Base Panel Replacement

Difficulty

Easy

Steps

2

Time Required

2 - 5 minutes

Introduction

  1. ZvdZXUrvA6rJdf4A
    ZvdZXUrvA6rJdf4A
    xX3cRX2iOHAY5HIS

    • Shut down and unplug your device before proceeding.

    • Remove the thirteen 6.5 mm screws from the base plate using a Phillips #00 screwdriver.

  2. XeWO6QtnafV6GR5S

    • Flip the laptop on its side and wedge a spudger between the base panel and chassis, then pry around the perimeter until the base panel releases.

    • To get a better grip you may want to open the laptop slightly.

    • Lift the bottom panel off of the chassis.

    • During reassembly, make sure that the bottom panel clicks back into place on all four sides of the laptop.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Connor

Member since: 29/03/22

12295 Reputation

One comment

I was wondering, do you know the gauge of the the 13 case screws? I'm trying to replace some I've lost for the case as well as the interior screws around the fan and heatsink.

Samuel Anklin -