Introduction

The speaker is essential feature for the laptop as it connects users to the sound of the videos overtime quality might go down and eventually the speaker of the computer will completely go out, it must be repaired quick. Since that is the case, following this guide will go into a great detail about how to replace the speaker,

This will be a low cost and efficient way to do an replacement on the speaker. For this guide, we will be using the iFixit Precision Bit Driver, T5 Torx Screwdriver Bit(1.4 mm), Anti-Static Wrist Strap, and an opening pick.

  1. MXiTq5bUTWJsXNBW
    • Start by putting on your anti static wrist strap and connecting it to a stationary and stable object, like a desk.

    • This safety strap serves as a precaution to prevent any electrical static you might have on your body from transferring to the laptop's internal components and damaging the hardware.bold text

    • Reminder to have this safety strap on you at all times during the process

  2. eYPoe6NfywypQeT1
    eYPoe6NfywypQeT1
    LOmpJfwJ5QDaUKUT
    YYlsrOOgTLec656X
    • Use a T5 Torx screwdriver to loosen and remove all eight bottom cover screws.

    • If you're having issues removing the back cover of the case, be sure to use the opening pick to pry the case open carefully.

  3. cjgZCTQN5MVG1xyF
    cjgZCTQN5MVG1xyF
    KTT1VkQBvvfIh6qL
    lPFwToev3GAwisuC
    • Unplug the speaker port from motherboard.

  4. Zjg5bVObFW4IYNh1
    • Remove the screws holding the speaker in place. There are 2 screws that need to be removed.

  5. cfCq6MhZY3PWYm1L
    • Take out the speaker from its port, it should not be very hard to pull it out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Curtis Blue Akins iii

Member since: 06/02/24

121 Reputation

0 comments