Introduction
If your Lenovo ThinkPad Yoga 11e Gen 6 has a broken screen, it may make it difficult to see the display properly. A cracked laptop screen is a serious injury hazard, as shards of broken glass may cut you or become imbedded into your skin. This guide will demonstrate how to safely replace the broken screen.
-
-
Disconnect the laptop from power and make sure it is completely powered off.
-
Turn the laptop facing down.
-
Loosen the eight captive screws using a JIS #0 screwdriver.
-
Carefully remove the panel.
-
-
-
Carefully disconnect the two sliding connectors in the left and right corner.
-
Disconnect the sliding connector on the Wi-Fi board.
-
Loosen the four 9.7 mm screws on the hinges in the top left and right corners using a Phillips #0 screwdriver.
-
Carefully lift the closest part of the laptop away from the screen side of the laptop.
-
-
-
Using tweezers, gently pry and remove the covers on the LCD strip.
-
Remove the two 3.3 mm screws that were previously under the covers on the LCD strip using a Phillips #0 screwdriver.
-
Carefully lift and remove the LCD strip.
-
-
-
Remove the two 3.3 mm screws from the silver panels using a Phillips #0 screwdriver.
-
Remove the two 3.3 mm screws from the LCD panel using a Phillips #0 screwdriver.
-
Carefully lift the screen towards you. You may use the spudger to assist lifting the screen. There will be one more connector on the side of the screen.
-
Carefully remove the ribbon connectors by gently pulling with your fingers.
-
To reassemble your device, follow these instructions in reverse order.
