Introduction

  1. gEttLQmVxgcFVQNl
    gEttLQmVxgcFVQNl
    ChAHCmSN6ZK1PRlk
    • Make sure the laptop is powered off and unplug all cables before beginning any repair.

    • Flip your laptop over and place on a flat surface so you can access the screws on the base cover.

    • Remove the six 7 mm screws from the back panel of the laptop using a Phillips #0 screwdriver.

    • Remove the four 4 mm screws from the bottom edge of the laptop using a Phillips #0 screwdriver.

  2. BE3BdyMabPDNScRf
    • Use an iFixit opening tool to pry apart the case by sliding it along each side of the laptop.

    • You may need to move the tool to different locations to fully release the back cover.

  3. 2OpKYWWtPND6DJbv
    • Lift away the back panel and set it aside.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kristen Gismondi

Member since: 12/11/14

92224 Reputation

0 comments