Lenovo Yoga 500-15IBD Power Switch Repair/Replacement

Written By: Martin
  • Comments: 2
Lenovo Yoga 500-15IBD Power Switch Repair/Replacement

Difficulty

Moderate

Steps

9

Time Required

No estimate

Introduction

The Computer cant be started by pushino go the power switch

  1. Uww5JTODAq2rQDsH

    • Most of the necessary tools are part of the toolkit IFIXIT Pro Tech Toolkit

    • additionally is needed

    • soldering tools and materials (soldering pasta, soldering iron, soldering flux etc)

    • magnifying glass if necessary

  2. IZKo2HkQ2rEUgtXW

  3. jpZ1hM3nAwrMZpHQ
    jpZ1hM3nAwrMZpHQ
    n6ruH4DmbLwUNYgE
    JbyvjcVLWYIKLg6L

    • Remove the screws from HDD

    • Disconnect the flat cable from Motherboard

    • Attention: The cable is is connected in a kind of clamp connector! Open the connector to remove the cable

  4. MahKtcdSFhq4rRJx
    MahKtcdSFhq4rRJx
    tiWKAJaFlZvbFDJu

    • Disconnect the battery

    • Remove the screws

    • Remove the battery

  5. ZVCjqTRClZTOldy2

    • Remove the screws

    • Remove the fan

    • Clean the Fan with compressed air if necessary

  6. vB4PswAORds4ZrvI

    • Disconnect all the flat from motherboard in the same way as the HDD flat cable has been disconnected

    • Fan cable need to be disconnected too

  7. QTqVAVhAKBdlrNEE

    • Remove the screws of motherboard

    • Lift slightly the motherboard and remove it from pc

    • Turn the motherboard upside down

    • on the bottom side (which is now on the top) is the placed the power switch

  8. yhIlsBoYrMiwTPRJ
    yhIlsBoYrMiwTPRJ
    1xjxHmomimQDpK6b
    eu1IkpkU31abTjTs

    • At least now the ESD-Protection Kit should be used for all following steps

    • Use suitable flux for soldering

    • place and solder the power switch on the motherboard

    • residues of solder should be removed by desoldering stranded wire

    • residues of flux should be removed too

  9. AORDChFoeCC1SPwg

    • During reassembling of motherboard in housing is necessary to pay attention to the power switch. The outside button must be precisely placed on the power switch

Conclusion

Follow the steps backward to reassemby the gadget again.

Author

Martin

Member since: 12/12/20

253 Reputation

2 comments

hallo martin,

die anleitung ist soweit sehr übersichtlich, auch die bilder sind detailreich. allerdings fehlen mir die informationen zu dem nötigen ersatzteil, dem leistungsschalter.

Dieter -

Hallo Dieter,

Deine Nachricht landete bei mir im Spam, deshalb habe ich sie erst jetzt entdeckt.

Der Schalter ist mir abgefallen. D.h. ich musste den nicht bestellen, nur im Gerät finden :)

Gruß

Martin

Martin -