Les Paul Wireless Guitar Peripheral Fret Buttons Replacement

Written By: Chris
  • Comments: 1
Les Paul Wireless Guitar Peripheral Fret Buttons Replacement

Difficulty

Easy

Steps

5

Time Required

10 minutes

Introduction

This guide will demonstrate how to open the neck of the guitar and replace the fret buttons, the colored buttons on the neck that correspond to the notes in the game.

  1. ayddHWweR3ToLl1c

    • Pull the Lock on the back of the body to detach the neck from the body.

  2. PkitXwmZFLWt2lfQ
    PkitXwmZFLWt2lfQ
    sfj2guQ5uAlAlani

    • Remove the 10 screws (each are 1 cm long) on the back of the neck using a T-10 Torx security screwdriver.

    • Remove the back of the neck.

  3. mg3QlWoTkjFDERpS
    mg3QlWoTkjFDERpS
    ZAgIGkjg3yC3MH36

    • Unscrew the two screws on the fret PCB using a PH1 Phillips head screwdriver. Each screw is 0.8 cm.

    • Remove the fret PCB

    • The fret PCB is in very tight. Be careful not to break it.

    • The connector from the neck to the body can easily slide out of place. Make sure it is in position before closing the neck

  4. DucMD4DTKjWdsWpy

    • Remove the blue fret button pad.

    • This pad should not be attached in any way

  5. bVYBNnr42LEmJZwK
    bVYBNnr42LEmJZwK
    25yCfoWP5SlPO1jF

    • The fret buttons should now easily slide out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Chris

Member since: 18/10/13

905 Reputation

One comment

There are actually 12 screws in Step2. Just in case anyone is confused by that; starting from the right side we have a pair lined horizontally, pair lined vertically, pair lined horizontally....

The two that are vertically between the other two pairs, are not marked in the photo.

Vynneve -