Logitech UE Boom 3 Battery Replacement

Written By: Ethan Donahue
  • Comments: 0
Logitech UE Boom 3 Battery Replacement

Difficulty

Easy

Steps

4

Time Required

2 minutes

Introduction

This guide is for the Logitech UE Boom 3 - model number: S-00171. Alternative model numbers could be S-00171-A, S-00171-B, S-00171-C.

The primary objective of this guide is to provide step-by-step instructions for replacing the battery of the Logitech UE BOOM 3. By following these instructions carefully, users can address issues such as low battery life, device not turning on, or poor speaker function.

The battery is essential as it provides the power needed for its portable operation.

  1. nJSZ4GKLGODSOMGJ
    nJSZ4GKLGODSOMGJ
    1ZxmBmYDfvn3jqJj

    • Flip the speaker so the base is facing upwards.

    • Place the iFixit opening picks in the gaps of the speaker.

    • Use the picks to pry open the speaker.

  2. fGlYHI4rj3AxxGun
    fGlYHI4rj3AxxGun
    q1AYe6tElJBiUShF

    • Use a Jimmy to completely pry the base away from the rest of the speaker.

  3. ZuExZC2PFlqMZWUr
    ZuExZC2PFlqMZWUr
    OQrq2wXJWOt6Ties
    PdlgLqoPAWaYHqeb

    • Remove the adhesive strap holding the battery in place.

    • It is sticky and tightly bounded, but removal is necessary.

    • Pull out the battery by hand until it is out of the casing and being held by the cable only.

  4. uW3pECclIafKwVMs
    uW3pECclIafKwVMs
    mrfNhypXN5hmOgmU

    • The battery will still be attached to motherboard via cable.

    • Carefully press down on the lever on the end of the cable and disconnect it from the motherboard.

    • This cable is intricate and is susceptible to damage beyond repair. Be extra careful to precisely insert and remove the cable as bending the pins can result in damage.

    • Remove the battery from the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ethan Donahue

Member since: 18/03/24

600 Reputation

0 comments