Marshall Kilburn Battery Replacement

Written By: Kai Hattan
  • Comments: 4
Marshall Kilburn Battery Replacement

Difficulty

Easy

Steps

3

Time Required

2 minutes

Introduction

The rechargeable battery used in this device is one of the components most likely to fail. Fortunately the replacement process is simple and straightforward. Follow this guide for a pain-free battery replacement experience.

  1. JpxvJpFEOpcXZTkL
    JpxvJpFEOpcXZTkL
    AKoEOcQvrhhVVxru

    • Place the unit face down as shown in the picture, exposing the battery cover.

    • Remove the two 4.0mm long screws holding the cover on using a T10 driver.

  2. FSYTmlrhpaZBI5wi

    • Remove the battery cover using a fingernail or nylon spudger.

  3. 4igFATd2kvJ25hlU

    • Remove the battery and unplug the power lead.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kai Hattan

Member since: 16/01/19

133 Reputation

4 comments

Where can I get a replacement battery? The unhelpful guys at Marshall say it’s not a spare part that can be soruced/replaced. Any suggestions?

Guy

Guy -

My new bought killburn. Doesnt charge. Any idea whats the problem of this?

Mart -

Hi, does anybody know how to recharge the battery external, because something on the platina fried (LL10) component, and it want charge through the killburn, but works fine with battery. Thank you

Adnan Kasumovic -