Miadore Classic N64 Controller Buttons Replacement

Written By: angel villagomez
  • Comments: 0
Miadore Classic N64 Controller Buttons Replacement

Difficulty

Easy

Steps

8

Time Required

20 - 40 minutes

Introduction

This guide demonstrates how to replace the buttons on the Miadore Classic N64 Controller. If the buttons are damaged or just misaligned, this guide can help solve your issue. This guide can also be used if you just want to change the buttons with custom buttons.

Before you replace the buttons, you may want to review the Miadore Classic N64 Controller Buttons are Unresponsive troubleshooting page for tips on how to resolve your issue.

Unplug the controller from your device before you begin this repair.

  1. tQTljShbE6fvliSA
    tQTljShbE6fvliSA
    YGPIJr2teysrCXya
    Jrr4QEIC6B4qKKs6

    • Unscrew all nine 3.2 mm Phillips #000 screws from the back of the controller.

    • Remove the back panel of the controller.

  2. vDIjLTBc6OPo2QxS
    vDIjLTBc6OPo2QxS
    QXHtfmW6s1sqrxoJ

    • Remove the three 3.2 mm Phillips #000 screws holding the motherboard in place.

    • The motherboard will still be in place after the screws are removed.

  3. bDti4nQ4aEKZkcQZ
    bDti4nQ4aEKZkcQZ
    fQtNuN1BJQYDl2wM
    DRs63LiTDg4dAVO5

    • Remove the three 3.2 mm Phillips #000 screws holding the joystick module in place.

    • Remove the joystick module.

  4. RcbTJPETnEfjRxXC
    RcbTJPETnEfjRxXC
    KfZRXSjiYUjqNLyI

    • Remove the joystick by pulling it away from the needle-like object holding it in place.

    • Replace it with a new or custom joystick.

  5. GIcVILoYJDRkeILx
    GIcVILoYJDRkeILx
    KHBwLcUmuqdnLg4G
    geA2SBA34qPJnsSp

    • Remove the right and left bumper.

    • If the bumper buttons are the buttons that need to be replaced, you can stop here.

  6. j22aolFEGF5Q6ucG
    j22aolFEGF5Q6ucG
    QeQ1nE4pAERoxZZ3
    wZxNPdCXKkEBLFNH

    • Plastic spokes through holes in the motherboard keep it in place.

    • Pull the motherboard up with even pressure on all sides.

    • Set the motherboard to the side.

  7. PMDNGu6BVNDGhYv2
    PMDNGu6BVNDGhYv2
    33IEG4KSJV1wFfsb
    UFin4NmLl4pNsDYI

    • Remove the rubber pads. This will reveal the buttons underneath.

  8. rspMcPqrR5XZrwWo
    rspMcPqrR5XZrwWo
    JHDiqhqZljtvZlry

    • Remove the buttons by pushing up from the bottom of the controller. This will cause them to pop out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

angel villagomez

Member since: 16/09/24

301 Reputation

0 comments