Milwaukee M12 2457-20 Disassembly

Written By: Peter Lizotte
  • Comments: 0
Milwaukee M12 2457-20 Disassembly

Difficulty

Easy

Steps

6

Time Required

10 minutes

Introduction

This guide will show you how to disassemble the Milwaukee M12 Cordless 3/8" Ratchet to access various parts for replacement or repairs.

  1. sBqieu6hmrSD2NpN
    sBqieu6hmrSD2NpN
    TjgKE3ggruqwPTBT

    • Unscrew the four M3 x 10 T-10 screws located on the neck.

  2. LHL5aaACoRSGEXak
    LHL5aaACoRSGEXak
    LpgAHADTiFyQGiFu

    • Remove the spring pin from the switch paddle and take off the switch paddle.

  3. cV5UCBxHntpoVcJK

    • Unscrew the four M2.6 x 14 ST T-8 screws located on the body.

    • Unscrew the M2.6 x 10 ST T-8 screw located underneath the switch paddle.

  4. QP4S1UUem5wmBkAg
    QP4S1UUem5wmBkAg
    upN3pgeDMUEJnbdV

    • Separate the two housing parts of the tool.

    • Remove the 3/8" yoke assembly and the motor assembly from the tool housing.

  5. I1TX1JmJrNV6FCxn
    I1TX1JmJrNV6FCxn
    wHmvhSei34S5H3vr

    • Remove the drive pin connecting the 3/8" yoke assembly and the motor assembly.

    • Remove the crankshaft, planet gears, carrier assembly, and ring gear from the motor assembly.

    • Be aware that these parts are lubricated with grease.

  6. Ft5IUV1jekyHsQcr

    • You have now successfully dismantled the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Peter Lizotte

Member since: 25/10/19

183 Reputation

0 comments