Motorola Moto G 2nd gen. 2014 Battery Replacement

Written By: Sophia
  • Comments: 9
Motorola Moto G 2nd gen. 2014 Battery Replacement

Difficulty

Moderate

Steps

6

Time Required

10 - 45 minutes

Introduction

  1. QTVDWZpV2RJj2gfw
    QTVDWZpV2RJj2gfw
    vUJSMk1rrQAJT4EG

    • Remove back cover.

  2. I3Od3WTLAFFlke6u
    I3Od3WTLAFFlke6u
    3mokSLVZ5Ted2WGL
    VjPEBn1seDka3tSV

    • Unscrew 14 screws and remove the back frame.

  3. dWoZdkhwZrQGo2oM
    dWoZdkhwZrQGo2oM
    1YWfUAVLGI1dtiVv
    MJbSGwXuhjAAdggg

    • Release SIM & SD card reader assembly connector and battery connector. Get loosen the vibrator.

  4. 3Mj15axRW2dF1U2m
    3Mj15axRW2dF1U2m
    hIBvZlZsWewdG51Y
    SUx24kEuDJQU55tj

    • Loosen kinds of stickers fastening card reader assembly and battery.

  5. oC4PJI23xPVi5nUH
    oC4PJI23xPVi5nUH
    XFf5NcET1MgUCbQA
    TcBwseDfTvmFC2Qf

    • Remove the battery with card reader assembly together at first. And then separate them.The battery flex is stuck on the back of the card reader assembly.

  6. iOYb1Q2PFTEdxX6A

    • The battery can be replaced now.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sophia

Member since: 25/03/14

43861 Reputation

9 comments

Hola, donde se puede comprar el reemplazo para el slot Sim-card del Moto G 2014 segunda generación?

Renzo Diaz -

Where can I get the replacement battery?

David -

Ebay, Aliexpress, Amazon, etc.

Example : http://www.amazon.com/MOTOROLA-2070mAh-L...

Just look at the reference on your removed battery, and order the same.

Xavier -

Battery Problem battery fast charge & fast low

PAWAN VISHWAKARMA -

What is the Mobile

VijayMani -

It is a moto g 2014

Baptiste Massardier -

Cant believe how i was peeling at the orange stuff on the battery, shud have found this guide sooner.

Craig Williams -

Where can I buy the new sim card holder please?

trudy2995 -

The 2014 LTE model XT1072 has a different, two wire (red and black) battery connector (battery model ‘FT40’). It can be replaced by simply removing the copper foil, no need to remove the card reader first.

hkramski -