Introduction

Full Device Name: Motorola Moto Stylus 4G (2023)

Model Number: XT2317

Alternate Name: Moto Stylus 4G (2023)

Objective: This guide aims to provide step-by-step instructions for replacing the battery in the Motorola Moto Stylus 4G (2023).

About the Battery: This device sports a model PG50 lithium ion battery (XT 2317) with a 5000 mAh capacity.

Device Symptoms: If the device begins to show a low battery life, longer charge times, or overheats, then use this guide to replace the battery.

  1. wGjrLQWONZNuQRdN
    wGjrLQWONZNuQRdN
    hJqTpUrkD5LRMrIV
    • Insert an opening pick under the edge of the case and slide it around the edges.

    • Separate the back panel from the rest of the phone.

  2. 5AGtKRrh2ufqJcrT
    • Remove the seven 4 mm screws from the phone’s top with a Torx T5 screwdriver.

  3. CHsNKlxDLZvaZ4ri
    CHsNKlxDLZvaZ4ri
    WRSLKVRUbekaCMpW
    • Use the opening pick along the edges to separate the camera lens glass from the board.

  4. se5OKYxII61smP5C
    • Remove three 4 mm screws with a Torx T5 screwdriver.

  5. yNxbuAfPL36VNhS3
    • Pry off the top perimeter with an ESD-safe spudger and set it aside.

  6. CWgIdYJMs2RnEcAu
    CWgIdYJMs2RnEcAu
    VqjKuydEapBJhJBT
    • Pull the black tab off of the battery gently with your hand.

  7. hCb4TPyHNVhZRZcH
    hCb4TPyHNVhZRZcH
    cu5ngxQTgRFkHgq6
    • Disconnect the four cables by inserting the opening pick beneath the edge of each.

  8. Ji6BKN2TR3kSOGDK
    Ji6BKN2TR3kSOGDK
    4AfwLCHmGNqvkW5X
    • Together with the opening pick and an ESD-safe spudger, remove the old battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Camille Holley

Member since: 14/02/24

585 Reputation

0 comments