NPET K10V3 Kickstand Replacement

Written By: Kristen Gismondi
  • Comments: 0
NPET K10V3 Kickstand Replacement

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

  1. GolFFhoMTwOE4Mhr

    • Flip the keyboard over so the bottom is facing upwards.

    • Remove five 4.5 mm screws using a Phillips #2 screwdriver.

    • Remove three 9 mm screws using a Phillips #2 screwdriver.

  2. kjXCZpg5kOOHbGZQ

    • Remove the kickstand from the keyboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kristen Gismondi

Member since: 12/11/14

92224 Reputation

0 comments