NexiGo NS32 Rear Case Replacement

Written By: Naiza Hall
  • Comments: 0
NexiGo NS32 Rear Case Replacement

Difficulty

Easy

Steps

3

Time Required

3 - 5 minutes

Introduction

This is a guide on how to replace the back plate on the NexiGo NS32. There are 3 steps in this guide that describe how to open the controller and change out the back plate. Be careful not to damage any of the internal components.

  1. 6vrwWBMKi2tEbUdZ

    • Orient the controller so that it is face down.

  2. BxwnnVkJVcyAvJVm
    BxwnnVkJVcyAvJVm
    MCypkOT2tNO3sg2Q

    • Remove the eight 9 mm Phillips screws that secure the rear case.

  3. qAvLOi5hM6GiBVZa

    • Lift the rear case up and off.

    • You may need to use an opening tool to help release the rear case, but avoid using excessive force so you don't damage the controller.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Naiza Hall

Member since: 29/01/24

265 Reputation

0 comments