Introduction
If your Nikon Coolpix S9050 is not turning on, the menu wheel and OK button may need to be replaced. The requirements for this procedure are to have a Phillips #000 screwdriver and a flat surface to disassemble the parts. Make sure the camera is off and it is recommended to work in a dry area.
-
-
Using a Phillips #000 screwdriver, remove the two 3.2mm black screws on both sides of the camera.
-
Set the camera face down and remove the four 3.2mm silver screws using the same screwdriver.
-
-
-
Lift the black plastic tabs, which are securing the panel.
-
Gently pull the panel out to separate the display ribbon cable from the camera body.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
