Ninja Foodi SP101 Bottom Panel Replacement

Written By: ben

Comments: 1

Ninja Foodi SP101 Bottom Panel Replacement

Difficulty

Easy

Steps

Time Required

1 minute

Introduction

On your Ninja Foodi SP101, the bottom panel allows you greater access to the interior of the device. This bottom panel also functions as a net to capture crumbs, grease, and other food particles. If the bottom panel needs to be removed for replacement/cleaning, follow this guide.

Tools

Step 1

Use a TR10 screwdriver to remove the four 11mm screws holding the black lever bar in place.

Step 2

Remove the black lever bar.

Step 3

Use a Phillips #1 screwdriver to remove the three 8mm screws on each side of the back panel.

Step 4

Flip the device upside down and open the bottom panel.
Remove the 3 x philips #1 screws along the top edge of the interior using a screwdriver. The Bottom 2 do not have to be removed.

Step 5

Remove the control side panel. To remove it, push forward towards then front control panel to release the tabs out of the main body. Fold away the side panel when the tabs have visually released from their slots in the main body.