PXN Arcade Stick Button Replacement

Written By: Derek Rosales
  • Comments: 0
PXN Arcade Stick Button Replacement

Difficulty

Easy

Steps

8

Time Required

5 minutes

Introduction

Many buttons become unresponsive after time, especially for a controller built for fighting games. This guide is for replacing any buttons on your PXN Arcade Stick.

This guide applies to all buttons from any position on the controller.

  1. XLXMEuYOOS4b2PjZ

    • Place the PXN Arcade Stick on a flat surface.

  2. cTSXaSFVoOqTFAak

    • Turn the controller upside down.

    • Remove the four screws from the bottom of the device.

  3. 43pNkUNIlwPpPBNN

    • Set the back cover aside, being cautious of the cable connected to the motherboard.

    • Unplug the controller converter plug.

  4. 1NhWsI3KZGyFY3vv

    • Unplug the button you wish to replace.

  5. qtFioSBBUqfh4lWC
    qtFioSBBUqfh4lWC
    UqOXphPJt3xUADnP

    • Push in and down on the button components.

  6. PPSvesRhlnBNETmP
    PPSvesRhlnBNETmP
    aTQ6UYrfSZJAcKbp

    • Use a spudger to push in and up on the button housing.

  7. HfSyAmiZIDJciBPZ

    • Line up the replacement button with the socket and push down.

  8. w6cYtvtmIxLWeVsI

    • Push the new button down into the back case of the controller.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Derek Rosales

Member since: 21/10/24

157 Reputation

0 comments