Introduction
This guide will provide instructions and visuals on how to replace the display screen.
Tools
-
-
Using a Torx 5 screwdriver, remove the four screws located on the rear cover of the device by turning counterclockwise. Set aside screws.
-
-
-
Carefully lift up the circuit board, which will also lift up the screen. Do so carefully to prevent breaking the connectors.
-
-
-
Unplug the three connectors located on the right side of the circuit board with great caution and care.
-
Slide the cables out gently using a spudger
-
Separate the screen from the board.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
