Philips Sonicare ProtectiveClean 6500 Internal Assembly Replacement

Written By: Connor
  • Comments: 0
Philips Sonicare ProtectiveClean 6500 Internal Assembly Replacement

Difficulty

Moderate

Steps

3

Time Required

5 - 10 minutes

Introduction

Use this guide to access components on, or to replace entirely, the Philips Sonicare ProtectiveClean 6500 internal assembly.

  1. qHkJ4aTEWSqpkTG1
    qHkJ4aTEWSqpkTG1
    tYniFBs3Z3MZxeot
    oh1jx5RogS15XssJ

    • Pry the bottom cap away from the toothbrush body.

    • Pry the bottom cap away from the toothbrush body until it releases.

    • Remove the bottom cap by hand.

  2. sldqoYVPsHXVWGgU
    sldqoYVPsHXVWGgU
    tfHcdb5uyLghvqqP

    • Use a metal spudger to release the two retaining clips inside the device.

    • The clips release when pried inward.

  3. AJ1qtmdDYDcNnDCv
    AJ1qtmdDYDcNnDCv
    VQL3PiAP1UQPSWdv

    • Slide the internal assembly out of the chassis.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Connor

Member since: 29/03/22

12295 Reputation

0 comments