Phone Iphone 4 (CDMA/Verz) Rear Panel Replacement

Written By: kempc8
  • Comments: 0
Phone Iphone 4 (CDMA/Verz) Rear Panel Replacement

Difficulty

Moderate

Steps

4

Time Required

20 minutes

Introduction

Replace back rear panel on Iphone 4 (CDMA/Verz)

  1. LBUjvAWOjBXRPAxv
    LBUjvAWOjBXRPAxv
    e4ogfjYhQGnT6PuH
    J5iDclTnMLGVSPOv

    • Back rear panel for Iphone 4 for (CDMA/VERZ)

  2. bTlmLOmMPVtqnBKc
    bTlmLOmMPVtqnBKc
    1VTGLYp2heSScIHv
    xFvfuuWGYgCIEe6T

    • We locate the two screws

    • The two screws remove ( I use the I FixITP2screwdriver)

    • Place the two to side on IFIXIT magnetic project mat . Because we need it for the new rear panel

  3. GqghBcinLVnn5o3Z
    GqghBcinLVnn5o3Z
    IDUUdDKaqQjuGJyU

    • After removing screws

    • Push forward on back panel and it should slide forward.

    • Remove old panel

    • ( I keep all new parts from IFixIT in package in till I am ready for repair)

    • I place back panel gently on the Iphone 4 . Slide the back panel down and screws both screws back in place . With P2 screwdriver

  4. aSaH1AHMYGbM3NpJ
    aSaH1AHMYGbM3NpJ
    VnVQoMHkxLXClZD3

    • Now have the new back panel on Iphone 4

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

kempc8

Member since: 23/11/13

905 Reputation

0 comments