Introduction

When the backplate is broken, it must be replaced to avoid a safety hazard. It may also be switched out if customization is wanted. This guide shows how to replace the backplate.

  1. xDNQONVJTDgMPCDi
    • Flip the controller over so the backplate is facing up.

  2. jD6VJPTko2bDdUaj
    • Use a Phillips #2 screwdriver to remove the eight 7.8 mm screws that secure the rear case.

  3. BuN6b1d66YCjHuCl
    • Hold the front case in one hand and pull the rear case off.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mallorie Barton

Member since: 19/09/24

409 Reputation

0 comments