Replacing a Wheel on your Patagonia Wheeled Luggage

Written By: Brittany McCrigler
  • Comments: 0
Replacing a Wheel on your Patagonia Wheeled Luggage

Difficulty

Very easy

Steps

3

Time Required

5 minutes

Introduction

It doesn’t happen often, but when a wheel on your Patagonia Wheeled Luggage blows out, it can leave you stopped in your tracks. Fortunately, installing a replacement wheel is quick and only requires a single hex screwdriver.

For replacement parts or further assistance, contact Patagonia Customer Service.

  1. xPhoUos4TvrEtKhT

    • Lay the bag down, with the problem wheel facing you.

    • Zipping the bag closed will keep it from flopping about as you work.

  2. FuqUA5p5AIVqBceN
    FuqUA5p5AIVqBceN
    y2TJHO52pBpYU1Ct
    bcSJkP5YTcBS1O4o

    • Using a hex 4.0 screwdriver, remove the threaded bolt in the center of of the wheel. This is the screw closest to the ground when the bag is upright.

    • Remove the bolt by pulling it straight out of the hole.

  3. bW6Q3UkNTnMLKjDo
    bW6Q3UkNTnMLKjDo
    IfKldvvnwuLBuCnb

    • Using one hand to lift and support the bag, take the wheel in your other hand. Pull the wheel out of its casing.

    • Removing the wheel may take a little force, do not be afraid to give it a tug.

    • To install your replacement wheel, follow these steps in reverse order with your new wheel.

Author

Brittany McCrigler

Member since: 05/03/12

89748 Reputation

0 comments