Revlon One-Step Hair Dryer Barrel Replacement

Written By: Rory Chappuis

Comments: 6

Revlon One-Step Hair Dryer Barrel Replacement

Difficulty

Easy

Steps

Time Required

5 minutes

Introduction

This replacement guide will help users to properly replace the barrel of the Revlon One-Step Hair Dryer. Replacing this component of the hair dryer could potentially resolve any problems regarding air flow.

Tools

Step 1

First, remove the pink panels on each side of the handle in order to access the screws.
Use the iFixit opening tool to remove the pink panels.

What is a fix it opening tool?

amg3232@yahoo.com -

Donde compro el barrel

Joan2apie -

You don't actually have to take these off. Why not just start on step 4 and 5, then do step 1? That way the top of the panel can be popped out to get the top screw, and the rest of the panel will come off without breaking the flaps

Val Ion -

Step 2

After removing the pink panels, there will be one visible screw on each side of the dryer handle measuring at 11mm.
Carefully unscrew both of these screws with a tri-point Y000 screwdriver.
Next, completely remove the screws out of the dryer handle.

Step 3

Remove the barrel by twisting and pulling it away from the handle of the dryer.
Before attempting to take the barrel off, make sure the dryer powered completely off and is cool to the touch.

I was only able to remove the brush after I used a flathead to pull the main black pieces on the handle away from the brush. These black pieces lock the brush into place.

Cecily Nolan - 05/03/23

Thank you, so helpful. I was about to just throw it away.

Saniyah Haines -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Rory Chappuis

Member since: 21/03/22

405 Reputation

One comment

Donde puedo comprar el cilindro repuesto?

Gretza Rincones -