Ridgid R250SFF Bottom O-Ring and Gasket Replacement

Written By: Jacob Brown
  • Comments: 0
Ridgid R250SFF Bottom O-Ring and Gasket Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

Since it is necessary to replace all related sealing parts at once, this guide will cover replacing both parts located around the air plug at the bottom of the tool. For this, you will need a 3-Gauge Allen wrench.

  1. ZZj2gi6G3oWWt2ke
    ZZj2gi6G3oWWt2ke
    gIQFDFZaYgIfGJeP

    • Positioning the nailer so the air plug is facing towards you, use a 3-Gauge Allen wrench to remove the three screws.

  2. ZMhEXywDVjcXDOGG
    ZMhEXywDVjcXDOGG
    HQAiudX4oFgCUbSh
    BMsW3FsLBDQdYTNL

    • Removing the both the air plug and the belt hook, you should see the gasket resting on the air filter.

  3. 1ZCpctlfGmSdKXqq
    1ZCpctlfGmSdKXqq
    xMICUfTOPYU2COPl

    • Around the base of this will be the O-Ring. Replace the worn O-Ring along with the worn Gasket.

    • The example model provided to our team lacks an O-Ring.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jacob Brown

Member since: 12/04/24

147 Reputation

0 comments