Introduction

This guide shows only removing the right ear pad on the Logitech G733 wireless gaming headset.

  1. oLEXqWONQZ1LXmDn
    oLEXqWONQZ1LXmDn
    gc2IrxHON6utxbEw
    tlLNlqDN3jUg4nJB
    • Power off your headset and unplug all cables.

    • During your repair, it can be helpful to lay your headset on a soft cloth to stabilize it and prevent damage.

  2. fsaLYmhDOcehq1gr
    fsaLYmhDOcehq1gr
    Jw62C2qpYHw2nvyp
    OmxCXSlurqcR4kBx
    • With one hand, firmly hold the right ear cup steady.

    • With your free hand, slowly pull the right ear pad away from the cup until it slides completely off its plastic lip.

  3. 5RQvHn13FbT1VeOR
    5RQvHn13FbT1VeOR
    HwafcnpjPVv2GqG3
    yNSA5saEEptbifxW
    • Putting the ear pad on the cup can be tricky. Be patient and work slowly—it may take a couple tries.

    • To put the ear pad onto its cup:

    • With one hand, firmly hold the right ear cup steady.

    • With your free hand, put your fingers into the right ear pad and extend them outwards to stretch the pad.

    • Place the pad over the bottom of the cup so the fabric flap slides over the cup's plastic lip.

    • Hold the top of the pad firmly in place and thread the rest of the fabric flap over the lip, working your way around the entire cup. Gently stretch the pad as necessary.

    • To prevent the fabric from sliding off its lip, use one hand to secure the section of the pad that's already been put back on.

    • Check the entire perimeter of the cup to make sure the ear pad is fully on. If any of the fabric flap is sticking out, try to push it over the lip or remove the ear pad and try again.

Spencer Day

Member since: 14/09/22

95592 Reputation

0 comments