Introduction
BEFORE YOU START:
ALWAYS unplug any electric device before doing any work on it.
Double check to make sure your Ryobi D620H drill is UNPLUGGED.
=== ===
The outside case of the Ryobi D60H drill must be removed in order to do any repairs. These instructions will tell you how.
Parts
-
-
Turn the drill so that the screws (circled in red) face upwards.
-
Use the T20 screwdriver to remove all nine screws.
-
-
-
Insert a flat object between the right and left sides of the drill to lift the right side of the case.
-
Remove the right side case to expose the inside of the drill.
-
Conclusion
Replace the outside case by placing it back and fastening all nine screws back on with the T20 screwdriver.
