Samsung Impression Keyboard Replacement

Orient the phone with the screen facing downward.

Slide the panel away from the camera using your thumb. This will expose the battery.

Insert the tip of the spudger on the left side of the battery.

Pry the battery out. It will pivot in the direction of the white arrow.

Remove the six 3.5 mm screws using a Phillips #000 screwdriver. Unscrew in a counterclockwise direction.

Gently pry around the edges with the spudger to remove back panel.

The side buttons will become loose and will fall out, so put these in a safe place.

Gently remove the black wire to free the circuit board.

Gently tug the black and blue ribbon upwards to release the circuit board.

Use a Phillips screwdriver to remove the six 3.5 mm screws by rotating.

The antenna assembly will snap off.

Remove the two base screws along the edge of the silver piece, where you just removed the black end piece.

The screws are 2.7mm in length.

The bottom black end cap will snap out.

Remove 6 screws holding the silver plate on.

2.7mm in length

The keys will peel right out of the screen side of the phone.

The silver piece you are left with is the physical keyboard assembly.