Introduction

  1. SaOfLbkeAxgmho5g
    • Unplug your refrigerator before you begin your repair.

    • If you are testing or repairing the following items, you may also need to shut off and disconnect the water supply:

    • Condenser fan motor

    • Compressor motor and thermal overload device

    • Water supply valve assembly

  2. XvIcxcXceVFt6Wko
    • Use a #2 Phillips driver to remove the screws securing the control board cover.

  3. nWXRxN1I6IHB4ENp
    nWXRxN1I6IHB4ENp
    QKRkqujCNR3wULwk
    • Grasp the cover at the upper edge and tilt the upper edge toward you.

    • Lift the lower edge off of the tabs at the bottom and remove the cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Bill Gilbert

Member since: 30/06/22

37443 Reputation

0 comments