Samsung PL200 SD card Replacement

Written By: Jacob Presnell
  • Comments: 0
Samsung PL200 SD card Replacement

Difficulty

Very easy

Steps

2

Time Required

2 minutes

Introduction

Replace the SD card on your Samsung PL200 to provide more memory space as well as replacing a defective card.

  1. WaFJZHLTmNikcFFp
    WaFJZHLTmNikcFFp
    bJSfPBjEeUYlxasi

    • Push the battery cover over to access battery/SD card compartment on the bottom.

    • There is a sliding release button (labeled 'OPEN') that can be slid sideways to open the battery/SD card compartment.

    • Slide this button in the direction that the arrow is pointing to release and open the spring loaded battery/sd compartment door.

  2. ieVDQ5p3js3KkAKl
    ieVDQ5p3js3KkAKl
    OZ6DEaW5lc5erl44

    • Once the battery/SD card compartment is opened, simply push the SD card down to activate the spring loaded ejector to raise SD card.

    • Use your fingers to remove the old SD card.

    • Insert the new SD card into the SD card slot and push it down all the way until it clicks and remains flush with battery.

    • Close the battery/SD card compartment.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jacob Presnell

Member since: 29/01/15

219 Reputation

0 comments