Introduction
Use this guide to replace the filter in your Shark Clean Sense HP102PET. Changing out your filter should be a regular chore when owning this device. Keeping the filter maintained ensures that your purifier is doing exactly what it was designed to do at all times.
-
-
Carefully flip the air purifier upside down and twist the bottom cap to the unlocked position.
-
Remove the bottom cap.
-
-
-
Pull out the old filter using the removal tabs and discard it.
-
Remove all packaging and wrapping from the new filter.
-
-
-
Insert the new filter and replace the filter door. Twist the filter door until it clicks into place.
-
Carefully return the air purifier to the upright position, plug it back in, and turn on the power. Calibration will begin.
-
-
-
After installing a new filter, press and hold the Filter Life button on the top control panel for 3 seconds to reset the filter life percentage. The unit will beep when the filter life is reset to 100%.
-
To reassemble your device, follow these instructions in reverse order.
