Shark Navigator Lift-Away Zero-M Roller Brush Replacement

Written By: Cindy Hernandez
  • Comments: 1
Shark Navigator Lift-Away Zero-M Roller Brush Replacement

Difficulty

Moderate

Steps

7

Time Required

10 - 30 minutes

Introduction

A roller brush aims to agitate carpets and floors to loosen dirt and debris, making it easier for the vacuum's suction to pick them up. It also helps direct debris towards the suction opening for efficient cleaning.

Use this guide to replace your roller brush. A roller brush may need to be replaced due to wear and tear, damage, irreversible clogging, or adjacent belt issues.

For help repairing the vacuum belt, click here.

Make sure the vacuum is not connected to power before proceeding.

  1. TeuOnkZp3KgmCmgN
    TeuOnkZp3KgmCmgN
    UanNf1usHpHp4tfi
    LZZCaLEZqNRTvYE2

    • Use any object with an edge to twist the three locks counterclockwise to the "unlocked" position.

  2. R1saT4XgWiuVYN2X

    • Use a Torx TR6 screwdriver to remove all ten 10 mm screws.

    • These are security Torx screws.

  3. wFPwIwTvxrVhmt51
    wFPwIwTvxrVhmt51
    CkqG31TIZqdAOQkr

    • Remove the two small power nozzle wheels.

    • Use a Torx TR6 screwdriver to remove the 10mm center screw.

  4. vcvjndYJ4xSrlMvv
    vcvjndYJ4xSrlMvv
    sLJj36PZfwXXThCJ

    • Use a Torx TR6 screwdriver to remove the two 10 mm screws that were hidden by the power nozzle wheels.

  5. NeWsw3SSDpb1plQo
    NeWsw3SSDpb1plQo
    jLtgbSkYZhVihill

    • Lift the clear plastic brush roller housing up and off of the unit.

  6. PRrW5BFxIxOKSQvY
    PRrW5BFxIxOKSQvY
    qGPDEYPQxXlsS5UZ
    NWcQajFv2bqJTY4b

    • Use a Torx TR6 screwdriver to remove the two 10 mm screws that secure the belt.

    • Remove the belt.

  7. wGcsPon3CdtxSF6A
    wGcsPon3CdtxSF6A
    uehaJ6MB6HroXuHw

    • Lift the roller brush directly up and out of the vacuum housing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Cindy Hernandez

Member since: 07/02/24

454 Reputation

One comment

How about how to replace the actual wheels? Do they sell replacement ones?

Tommy Cutlets -