Shark Stick Vacuum lock Pin Replacement

Also note ifixit forced me to crop the image so some of it is cut off??

NOTE: There is a screw under one of the front rollers!

use T20 security bit to remove screws.

use a T10 security bit

carfuly pry off top plastic plate. I cracked it, so be careful.

note: I made a typo in the image. should say "spring"

reference image. in next step we will put the pin back in

remove plastic cap on wheel. You a drill bit to cut a large hole on the end. we will use this hole to insert the pin.

put the white plastic piece into position and insert the pin through the hole we drilled in the wheel. ensure the spine end goes in first and the pin is full seated.