Sonos Play 1 Top Cover Disassembly

Written By: Adan Camerino Macias

Comments: 3

Difficulty

Moderate

Steps

Time Required

5 - 10 minutes

Introduction

This is a prerequisite for the other Sonos Play 1 guides.

Tools

Step 1

Remove the rubber footing from the bottom of the device. Pry it up from one end using one of the plastic opening tools.
Once you pry open one end, use precision tweezers to remove rubber footing.

Step 2

Using a metal spudger, pry open a corner of the adhesive tape.
Use precision tweezers to remove the adhesive tape.

Step 3

Remove the four 10 mm Torx security #10 screws that hold the base together.
Remove the base by lifting it vertically away from the bulk of the device.

The metal lip doesn’t hold down the metal screen. It’s just a connection/conductor between the inside of the metal screen and the shell against which the motherboard is screwed.

P-308 - 07/04/19

Step 4

Remove the 10 mm Torx security #10 screw that holds down the exterior screen.
Using precision tweezers, remove the metal bracket.

Step 5

Remove the exterior screen by lifting it away from the bulk of the device.

Step 6

Remove the four 9 mm Torx Security #9 head screws. There are two on each side.

Step 7

Using a plastic opening tool, pry open the top cap containing the power and volume button.
Vertically remove the top cap.
Be sure to not jerk the top cap when removing , as to not damage the cable linking the switchboard to the motherboard.

Easily done- fortunately mine didn't snap…

Oliver Moor -

Mi bocina Play1 se conecta a internet pero no se escucha. En el app se ve que está reproduciendo. Si subo o bajo el volumen en la bocina se mueve en el app.

Lalo -