Introduction

This is a how-to guide on replacing the front and back case of a Sony Cyber-Shot DSC W690. This case may need to changed or replaced if damage has occurred to the outside of the camera, to access internal units, or to upgrade the external cosmetics. This is a simple procedure.

  1. 3q3VPDQOliQk5SLY
    • Locate the battery door.

  2. DHChdysKvrHG2hfq
    • Open the battery lock by pushing the lid towards the inside and lifting.

  3. iAybrgKNpEruCaUZ
    iAybrgKNpEruCaUZ
    3wSgasmyFjyX6rkO
    • Remove the battery.

  4. eTHZMXO3qMFDHBjR
    • Remove the wrist strap from the camera.

  5. cO4JspnwOIQuefXx
    cO4JspnwOIQuefXx
    sLKHIgh3VVICH5La
    • Remove all six 3 mm screws from the outside of the camera using a Phillips #00 screwdriver.

  6. pjOhHNrbkQTMmtfF
    pjOhHNrbkQTMmtfF
    PNOMapTDhnFURavb
    • Carefully pry the case apart by pulling the front and back sides in opposite directions.

Conclusion

To reassemble your device, follow these instructions in reverse order; screwing the small screws in a clockwise manner.

Will Norris

Member since: 29/01/15

605 Reputation

One comment

Ola tenho uma maquininha dessas , só precisa trocar uma peça a tampinha que segura a bateria, alguém poderia me indicar onde compro .

Paulo Ribeiro -