Sony Cyber-shot DSC-W690 Navigation Buttons Circuit board Replacement

Written By: Will Norris
  • Comments: 0
Sony Cyber-shot DSC-W690 Navigation Buttons Circuit board Replacement

Difficulty

Moderate

Steps

9

Time Required

30 - 45 minutes

Introduction

  1. 3q3VPDQOliQk5SLY

    • Locate the battery door.

  2. DHChdysKvrHG2hfq

    • Open the battery lock by pushing the lid towards the inside and lifting.

  3. iAybrgKNpEruCaUZ
    iAybrgKNpEruCaUZ
    3wSgasmyFjyX6rkO

    • Remove the battery.

  4. eTHZMXO3qMFDHBjR

    • Remove the wrist strap from the camera.

  5. cO4JspnwOIQuefXx
    cO4JspnwOIQuefXx
    sLKHIgh3VVICH5La

    • Remove all six 3 mm screws from the outside of the camera using a Phillips #00 screwdriver.

  6. pjOhHNrbkQTMmtfF
    pjOhHNrbkQTMmtfF
    PNOMapTDhnFURavb

    • Carefully pry the case apart by pulling the front and back sides in opposite directions.

  7. lHoiZlL5GdphNQMJ

    • Use spudger to delicately open wire contact.

  8. UGdLgSxhLA4wfIMB

    • Gently push LCD screen out of back case.

  9. Goo3SBQHjURikbXI

    • Remove and replace the button circuit board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Will Norris

Member since: 29/01/15

605 Reputation

0 comments