Sony ICF-C1iPMK2 Speaker Replacement

Written By: KyndleGabel
  • Comments: 0
Sony ICF-C1iPMK2 Speaker Replacement

Difficulty

Moderate

Steps

4

Time Required

20 - 30 minutes

Introduction

The speakers of the device allow you to listen for your favorite songs and hear your alarm in the morning. If you hear a crackling sound or no sound at all, follow these steps to replace the speaker.

  1. Z44cNoBF1PxXRita
    Z44cNoBF1PxXRita
    wCFZdOtyfADJTTCK

    • Unscrew the 1 cm Phillips #00 screws.

    • Use spudger to loosen the back panel of the device.

  2. TIDRX4KvtWD2gI4y
    TIDRX4KvtWD2gI4y
    vliMlSccgUUq3FAq
    LgIQNqcsgipwtJVh

    • This step contains ribbon cables. Be careful to not bend or rip these fragile cables, to protect your device.

    • Slowly pull the back panel off until it separated from the main panel.

    • Carefully unplug all of the ribbon cables connecting the back panel to the main panel.

  3. DruSSr54B22XD3YU
    DruSSr54B22XD3YU
    TIDFqRYbQneQXArn
    51UxJbUYvBBIZ5LB

    • Remove the power connector with a pair of ESD safe tweezers.

    • Remove the Aux port connector with a pair of ESD safe tweezers.

    • Slide the button panels out of the chassis.

  4. HqaPCYebBKZAoy3T
    HqaPCYebBKZAoy3T
    eEbCwDakGFIxHlTS
    4JsTmFPVBl1TM1dA

    • Unscrew the four 1 cm Phillips #00 screws and remove the speaker cover.

    • Unscrew the 1 cm Phillips #00 screws holding the speaker in place.

    • Remove the old speaker and insert the new one.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

KyndleGabel

Member since: 15/09/23

533 Reputation

0 comments